A rotary rake is built around one simple demand: a single tractor PTO shaft has to spin a whole row of tine rotors at matched speed and matched phase. The part that makes this possible is the rake gearbox, and in the HR series it is built as a one-input, mult...
View MoreA power harrow earns its reputation in the field, but the part that decides whether it survives a full season is usually hidden under a cover. The gearbox takes the PTO input from the tractor, redirects or steps it down, and delivers controlled torque to the ...
View MoreCorn headers are unforgiving drivetrains. Snapping rolls must turn slowly while carrying high torque, gathering chains must stay synchronized on both sides, the cross auger has to move a heavy mat of stalks, and any of these functions can seize within a secon...
View MoreHangzhou Hengnie Machinery Co., Ltd. supplies Agricultural PTO Shafts as part of a transmission program that also includes agricultural gearboxes, cylindrical gears and Power Transmission Shafts. A PTO shaft in our range connects a power source — a tractor stub, hydraulic motor or intermediate gearbox — to an implement input over a mechanical distance, with an angle-offset compensation margin that absorbs installation displacement and operating vibration.
As an Agricultural PTO Shafts Manufacturer, we supply this product family for OEM driveline engineering, machine replacement programs and complete agricultural equipment builds. The shafts are applied where the transmission path must bridge a gap between components outside the gearbox housing, keep torque flow even and stable, and survive continuous field duty in dusty or wet conditions.
Within the Gearbox Spare Parts & Components program, PTO shafts are treated as part of the complete driveline rather than as a standalone tube-and-yoke item. We define the shaft together with the gearbox input, mounting orientation and overload protection so that the final assembly lines up with splined stubs, flanges or standard implement connections.
Where the PTO shaft belongs to a new machine program, we combine the shaft proposal with Custom Gearboxes work so the complete drive — gearbox, input connections and PTO line — is specified once and manufactured under one quality plan.
The primary fit is agricultural machinery where power must be carried between two independent mechanisms outside the gearbox housing. Common drive points we configure:
These applications set the length, angle, torque margin and protective requirements. The surface layer is rust-proof and wear-resistant, and torque transmission is even and stable, which is what we maintain when configuring tube section, joints and guards for each machine type.
| Machine group | Typical operating condition | Configuration emphasis | Design consideration |
|---|---|---|---|
| Rotary mower | Tractor PTO at 540 rpm, moderate working angle | Telescopic shaft with standard splined stubs | Guard coverage and balanced rotation |
| Round baler | High torque peaks at pick-up engagement | Clutch-protected shaft assembly | Shear-bolt or cam-clutch overload setting |
| Rotary tiller / power harrow | Continuous heavy load and strong vibration | Reinforced tube and yoke set | Angle-offset compensation and secure retention |
| Fertilizer spreader | Long transmission distance from tractor to spreader | Long telescopic profile | Stable torque flow across extended working length |
| Sprayer pump | Steady speed, continuous running | CV joint where angle exceeds standard U-joint range | Smooth transmission at elevated angle |
| Feed mixer / grain conveyor | Intermittent reversing loads | Larger torque margin on tube and joints | Durable spline engagement |
Because the shaft operates outside the gearbox housing, it is exposed to conditions that internal components do not see. Our selection logic covers tube section and wall thickness matched to nominal and peak torque, telescopic outer and inner profiles sized to the stroke between compressed and extended working length, rust-proof and wear-resistant surface treatment for dust, moisture and washdown, and yoke, U-joint or sleeve connections selected for the machine's spline, flange or quick-release interface.
In every proposal, we confirm the following before manufacturing: working length compressed and extended, required stroke, spline size and tooth form on both ends, nominal torque, peak torque, operating speed, maximum working angle and guard requirement.
A PTO shaft order typically includes more than a bare tube. We define the complete assembly and its protection:
For machines built around a Hengnie gearbox, the shaft interface is defined together with the gearbox input flange or spline so both components are dimensionally consistent. For machines using an existing gearbox, the shaft is measured against the customer's installation drawing and confirmed before production.
Production follows our factory-wide control system: incoming material control, in-process monitoring and final inspection before shipment. For PTO shafts this includes dimensional accuracy, spline fit, surface condition, assembly status and export packaging integrity.
Before delivery we confirm technical drawings, bill of materials, packing list and nameplate information against the order. Inspection records from production and final test stages are available for the customer's acceptance review, and export packaging is arranged for long-distance sea freight.
To prepare a proposal that matches the real machine, we need a clear definition of the working point. The following project data allows us to configure the shaft family, connections and protection:
Yes. Customized manufacturing is our core business. We develop and manufacture from customer drawings or samples, and we confirm material treatment, spline interface and guard arrangement before production.
We calculate from the machine's power rating, working speed and load profile, then add margin for the peak torque that occurs at engagement or under impact. The tube section, joint size and overload protection are then selected for that working point.
We supply complete shaft assemblies: telescopic tubes, yokes, universal or CV joints, guards and end fittings. When the same machine also uses a Hengnie gearbox, the shaft and gearbox are proposed as one drive package.
The shaft surface is specified to be rust-proof and wear-resistant for field exposure. The exact treatment is confirmed with the customer based on the operating environment and documented in the proposal.
We deliver technical drawings, specification and installation documentation, inspection records from production and testing, packing lists and export shipping documents. Remote technical consultation is available after delivery for assembly and troubleshooting.