A rotary rake is built around one simple demand: a single tractor PTO shaft has to spin a whole row of tine rotors at matched speed and matched phase. The part that makes this possible is the rake gearbox, and in the HR series it is built as a one-input, mult...
View MoreA power harrow earns its reputation in the field, but the part that decides whether it survives a full season is usually hidden under a cover. The gearbox takes the PTO input from the tractor, redirects or steps it down, and delivers controlled torque to the ...
View MoreCorn headers are unforgiving drivetrains. Snapping rolls must turn slowly while carrying high torque, gathering chains must stay synchronized on both sides, the cross auger has to move a heavy mat of stalks, and any of these functions can seize within a secon...
View MoreAs a Custom Design Gearboxes Manufacturer, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.
Hangzhou Hengnie Machinery Co., Ltd. — engineered transmissions for tillage, planting, field management and harvesting equipment.
Hangzhou Hengnie Machinery Co., Ltd. is a China-based Custom Gearboxes manufacturer and OEM/ODM development partner for agricultural machinery. We design and build non-standard gearboxes when a standard catalogue unit cannot meet the working point, mounting envelope or duty cycle of your implement.
Our custom engineering starts from the actual machine: PTO input speed, torque and shock loads, operating width, available installation space, sealing requirements and target service life. We then work through housing material, gear geometry, shaft and bearing arrangement, lubrication and sealing to produce a transmission that fits the application rather than forcing the application to fit a catalogue.
Most custom projects start from a proven architecture in our existing range. This reduces development risk and shortens the path to sampling.
Lightweight right-angle spiral bevel units for auxiliary drives, conveyors and compact machinery. Good heat dissipation and corrosion resistance where total weight matters.
Heavy-duty right-angle drives for rotary tillers, wood chippers and conveying systems exposed to dust, mud and impact loading.
Cast iron angle drives with multiple shaft angles for grain conveyors, mower cutter bars and corner transmissions.
Multiple gearbox sections joined on a common axis for synchronized multi-point output on manure spreaders and wide implements.
Aluminum or cast iron reduction drives for PTO generators, crushers, fertilizer spreaders and mixers where input and output run parallel.
Direct-mount hydraulic motor input for orchard spreaders and fertilizer machines with frequent start-stop and pressure fluctuation.
PL mixer, RD power harrow, BL round baler, SP sprayer pump, HV corn header and HR rotary rake units developed for a specific machine function.
Spiral bevel gears, gear shafts, cylindrical gears, transmission shafts and PTO shafts for production support and aftermarket replacement.
| Project Type | Typical Input We Use | What We Deliver |
|---|---|---|
| Non-standard adaptation | Existing catalogue unit with different shaft length, ratio, flange or housing | Re-engineered casting, machined joint faces and revised gear set |
| Machine-specific development | Machine type, PTO or hydraulic input, output position, operating width | New housing design, gear geometry, sealing and bearing specification |
| Drawings or sample-based OEM | 2D/3D drawings, sample unit, bill of materials | Process planning, tooling, prototypes and serial production |
| Complete drive system package | Gearbox plus PTO shaft, gears, sprockets or control system | Matched components, one supply chain point and assembly support |
Our custom gearbox work covers core agricultural processes: tillage, planting, field management and harvesting. The same design logic applies whether the unit is a primary drive or a small auxiliary transmission.
Field conditions are not the same as factory floor conditions. Our custom designs address the specific risks of agricultural drivelines rather than simply copying an existing transmission layout.
We are a direct manufacturer, not a trading desk. Our engineering team works from customer drawings, samples or working-condition descriptions and takes the project through design, tooling, prototype and serial production.
We operate under an ISO-based quality management system with three control stages: incoming material inspection, process monitoring and final product inspection. For customized gearboxes we additionally coordinate performance testing and factory acceptance tests when the project requires them.
Custom transmissions often need matching components to form a complete driveline. We supply gearbox spare parts and components including cylindrical gears, bevel gears, power transmission shafts and PTO shafts. This allows us to quote a full drive package rather than only the gearbox housing and internals.
For machines with electro-hydraulic or electronic functions, our range also includes intelligent transmission boxes and agricultural machinery program control systems. Tell us the control interface you use and we will configure the gearbox and sensor or actuator mounting points around it.
Every custom gearbox leaves our factory with inspection records and export-grade packaging prepared for sea freight and long-distance transport. After delivery we supply the drawings, specification manuals and installation guides needed for assembly and commissioning on your production line or in the field.
Our engineers also provide remote technical consultation for fault analysis and working-condition follow-up. We use field feedback from customers to refine the design for subsequent batches, which is an important part of our OEM/ODM development loop.
To prepare a concrete proposal, we need enough information to define the gearbox as a system, not just a ratio and a flange size.
If you have drawings or a sample, we can develop directly from those. If not, our technical team can start from the application description and propose a suitable architecture before detailed design begins.
Yes. Many projects start with a machine description, PTO speed, torque range and installation space. Our engineers then propose a gearbox configuration, confirm the interface with your team and produce drawings for approval before manufacturing.
We match the housing material and gear rating to the duty cycle. Aluminum housing gearboxes suit low- and medium-load applications where weight and heat dissipation matter. Cast iron gearboxes handle impact loads, muddy field conditions and continuous heavy-duty operation.
Each customized product can be accompanied by inspection reports, test records and final inspection sign-off before shipment. For projects that require it, we arrange performance tests and factory acceptance tests and include the results with the shipping documents.
We manufacture gearbox spare parts and components such as bevel gears, cylindrical gears, transmission shafts and PTO shafts. This lets us supply the gearbox together with its input or output shafts and associated transmission parts in one coordinated package.
After delivery we provide installation documentation, specification manuals and remote technical consultation. Our project follow-up includes collecting field application feedback and using it to improve the product in later production batches.