A rotary rake is built around one simple demand: a single tractor PTO shaft has to spin a whole row of tine rotors at matched speed and matched phase. The part that makes this possible is the rake gearbox, and in the HR series it is built as a one-input, mult...
View MoreA power harrow earns its reputation in the field, but the part that decides whether it survives a full season is usually hidden under a cover. The gearbox takes the PTO input from the tractor, redirects or steps it down, and delivers controlled torque to the ...
View MoreCorn headers are unforgiving drivetrains. Snapping rolls must turn slowly while carrying high torque, gathering chains must stay synchronized on both sides, the cross auger has to move a heavy mat of stalks, and any of these functions can seize within a secon...
View MoreAt Hangzhou Hengnie Machinery Co., Ltd., we design and build agricultural drive components from our factory in Hangzhou, China. As a BA Series Agricultural Aluminum Housing Gearboxes Manufacturer, we supply right-angle spiral bevel gearboxes that change drive direction by 90 degrees while keeping mass low, heat dissipation high and sealing tight enough for field work. Agricultural Aluminum Housing Gearboxes from this family are used in balers, fertilizer spreaders, power harrows and general farm transmission positions where a lightweight aluminum housing is a real advantage.
Our BA series is the aluminum housing branch of a wider agricultural gearbox program. It sits beside our B Series Cast Iron Gearboxes and the Application-specific Gearbox families, giving machine builders a clear material choice. Cast iron remains the right answer for high impact shock loads; aluminum housing gearboxes answer the opposite problem: weight-sensitive equipment, corrosive environments, continuous running and installations where the gearbox is part of a structure that must stay light.
The BA range is not a single chassis. It includes compact solid-shaft units, spline-shaft agricultural transmissions, dual-output 3-way distribution boxes, vertical-mount gearboxes and small drives for balers, winches and auxiliary equipment. For OEMs this means the direction change, ratio, shaft standard and mounting position can be matched to the implement rather than forcing the machine around a generic box.
| Series | Drive geometry | Output arrangement | Application fit |
|---|---|---|---|
| BA73 | 90° spiral bevel | Solid shafts | Compact right-angle drives for automation, conveyors, packaging and auxiliary farm equipment |
| BA1082 | 90° spiral bevel | Spline shaft | Harvesting, fertilization and general farm transmission at 540 rpm PTO input |
| BA802 | 3-way right angle | Dual splined outputs | Multi-component machines needing synchronized power distribution |
| ND BA801 | 90° bevel | Agricultural transmission | Lightweight right-angle drives for general farm equipment |
| ND BA114 | 90° bevel | Baler transmission | Agricultural baler machinery drive points |
| ND BA902 | 90° bevel | Vertical mount | Farm implements requiring vertical input or output orientation |
| ND BA901 | Compact bevel | Mini drive | Mini winch and small agricultural machinery |
Aluminum gearboxes in the BA series use a cast aluminum alloy housing that keeps the unit light enough for suspended implement frames while maintaining the rigidity needed for clean gear meshing. The housing draws heat away from bearings and gear contact points, which matters when a baler or spreader runs a full day under load. The same material gives natural corrosion resistance against fertilizer dust, sprayed chemicals and field moisture.
Internally, the series uses precision-machined spiral bevel gears. Compared with straight bevel gears, spiral bevel gear teeth engage more progressively, which lowers vibration and noise and improves contact consistency. Gear blanks are machined and matched so the tooth contact pattern remains stable across the working speed range, and the housing is sealed to keep dust, water and crop residue away from the gear chamber.
For agricultural BA units, 540 rpm is the normal PTO input speed we design around. Ratings depend on ratio, bearing arrangement and shaft configuration, so we specify the complete working point rather than a single universal torque value.
Those figures are starting points for selection, not a substitute for a complete duty-cycle review. When an OEM specifies a different PTO speed, continuous load period or shaft standard, we return with the closest BA configuration and identify where a cast iron or application-specific housing would be a better mechanical choice.
The BA range is configured around the machine layout. Units can be mounted horizontally, vertically or as multi-output distribution boxes. The BA902 vertical-mount design suits implements where the input and output centers must be stacked, while the BA802 3-way layout gives one input and two synchronized splined outputs for combined machines that have to drive several working sections at the same speed.
Spline-shaft connections are used where positive drive is critical. They reduce the risk of slipping under alternating field loads and simplify assembly and service compared with keyed or tapered fits. For machine lines, we integrate the gearbox with the surrounding driveshafts, flanges and support brackets so the whole transmission path is addressed at the design stage.
Quality control at Hengnie is built around the ISO quality management system, with incoming material control, process monitoring and final product inspection. During production we check dimensional accuracy, gear performance, sealing, assembly status, surface finish and nameplate consistency. Before shipment, finished gearboxes are tested and the relevant inspection and test records are prepared for the customer.
For custom and high-volume orders, we can organize factory acceptance testing and final documentation review as part of the project schedule. Sealing is given particular attention on aluminum gearboxes because the housing material behaves differently from cast iron under thermal expansion, and a reliable seal is what keeps field moisture out of the bearing cavities.
Customized production is central to our work. We develop gearboxes from customer drawings, from samples and from working-condition descriptions, and we manage the full path from design to prototype to mass production. Our engineers are involved before the order is placed, reviewing torque, speed, installation boundaries, expected duty cycles and end-market requirements so the first sample has a much higher chance of being right.
We supply under the ND, AG and DY brands and support international OEM projects with technical consultation during development and after delivery. If the BA family is close but not exact, the Custom Gearboxes route allows us to modify housings, shaft ends, ratios or sealing arrangements without losing the production discipline of a standardized factory line.
Aluminum housing gearboxes are chosen partly for reduced maintenance: the housing resists corrosion and the sealed design reduces the frequency of internal service. Normal implement maintenance still applies, including oil level checks, seal inspection and torque checks on shaft connections. For long-running machines, we supply matching Gearbox Spare Parts & Components such as bevel gears, shafts and PTO shafts so field repairs do not depend on a full gearbox replacement.
Documentation is included with every project: drawings, specification manuals, installation guides, BOM and packing lists. For overseas delivery, gearboxes are prepared with export-grade packaging designed for sea freight and long-distance transport. After delivery, our engineers provide remote consultation, fault analysis and follow-up support for the working life of the machine.
To prepare a configuration and quotation, we work from the real operating point rather than a model number alone. Please include as much of the following as possible:
With those details we can return a specific BA series, the correct shaft format, sealing level and ratio, and a clear view of any part that should instead be handled by our cast iron or application-specific product lines.
The standard agricultural BA units we supply are sized around 540 rpm PTO input, which is the most common speed for the machine types in this family. If your implement uses 1000 rpm or another input speed, we review the gear set and bearing arrangement before proposing a configuration so the rating is not assumed.
Not always. Aluminum gearboxes offer a real weight and corrosion advantage, but they are more suitable for moderate power and stable load conditions. For implements with severe shock loading, such as heavy rotary tillage or wood chipping, our B Series Cast Iron Gearboxes are usually the better technical choice. We recommend the housing material according to the machine's real duty, not the lowest price.
BA73 is built with solid output shafts, while BA1082 uses a spline shaft and BA802 provides dual splined outputs. Other BA-family models cover agricultural transmission, baler, vertical-mount and mini-drive layouts. If the required shaft diameter, spline standard or keyway differs from our standard, that is the most common customization we make.
Each order is accompanied by the relevant dimensional drawings, specification manual, installation guide, BOM and packing list. For larger projects we also provide inspection records and test reports. On request, we can coordinate a factory acceptance review before the goods are packed for export.