A rotary rake is built around one simple demand: a single tractor PTO shaft has to spin a whole row of tine rotors at matched speed and matched phase. The part that makes this possible is the rake gearbox, and in the HR series it is built as a one-input, mult...
View MoreA power harrow earns its reputation in the field, but the part that decides whether it survives a full season is usually hidden under a cover. The gearbox takes the PTO input from the tractor, redirects or steps it down, and delivers controlled torque to the ...
View MoreCorn headers are unforgiving drivetrains. Snapping rolls must turn slowly while carrying high torque, gathering chains must stay synchronized on both sides, the cross auger has to move a heavy mat of stalks, and any of these functions can seize within a secon...
View MoreHangzhou Hengnie Machinery Co., Ltd. designs and builds the RD Series Power Harrow Gearboxes manufacturer range for agricultural tillage equipment. The RD series is our Agricultural Power Harrow Gearbox family for deep harrowing operations, where the driveline has to absorb instantaneous peak impact loads from hard soil clods and stones while transferring power efficiently to the harrow rotors. The range was developed around high housing deformation resistance, low transmission efficiency loss and the long cycle times expected in large-field land preparation.
This is a focused application-specific product line rather than a general right-angle gearbox family. We build it for power harrows and rotary harrow applications that work at depth, which is why the gearbox design emphasizes fatigue resistance, sealed operation in dusty field conditions and predictable service behavior in stony or compacted soil. The same engineering logic runs through our Rotary Harrow Gearboxes, with the RD series carrying the heavier end of the tillage spectrum.
RD series gearboxes sit at the core transmission point between the tractor drive line and the harrow rotor system. They are not universal boxes with extra mounting holes; housing, gear set, oil seals and output bearing arrangement are selected around the implement's working width, depth and load cycle. This approach keeps the unit compact and lets it handle continuous high-load field operation.
This family is part of the Application-specific Gearbox range. We manufacture three RD-series units that cover the main roles in a power harrow driveline: a primary drive gearbox, a heavy-duty drive unit and a clutch variable-speed transmission assembly.
| Model | Role in the driveline | Typical project fit |
|---|---|---|
| ND RD1952 | Primary drive gearbox serving as the core transmission part of the harrow | Power harrows in broad-acre tillage where reliable ratio and torque transfer are the main priority. |
| ND RD1552 | Heavy-duty drive unit for farm power harrow machines | Stony or compacted fields and high-horsepower applications where housing rigidity and bearing margin matter most. |
| ND RD1951 | Clutch variable-speed transmission assembly | Machines requiring PTO speed adjustment and clutch protection between the tractor and the harrow rotor. |
These models can be supplied as individual gearboxes or as part of a complete drive package. When the harrow manufacturer supplies a reference assembly, we confirm ratio, rotation direction, input and output shaft configuration and the clutch or speed-change requirement before making a proposal.
RD-series development starts from the working point of the machine, not from a standard catalogue. For each project we adjust gear tooth geometry, housing wall thickness, oil seal specification and output shaft bearing capacity so the gearbox matches the implement's load spectrum instead of being overbuilt or under-dimensioned.
Material and heat-treatment choices are reviewed with the customer for abrasive field conditions, high tractor power levels and the expected working hours per season.
Quality control is managed through an ISO-based quality system and runs through incoming material control, process monitoring and final product inspection. Our inspection routine covers dimensional accuracy, gear performance, sealing, assembly status and surface finish, using professional test equipment available in the plant. For customized units we also arrange the required performance tests and factory acceptance tests before shipment.
Our production scope includes ODM/OEM customization. We develop gearboxes from customer drawings, samples or a working-condition specification, and we cover the complete sequence from design and prototyping to mass production. This matters when a harrow model uses a restricted mounting envelope, a special PTO speed, an unusual rotor arrangement or a made-to-order clutch function. The factory runs standardized assembly lines, which allows several RD models and batches to be produced in parallel without mixing specifications.
If the RD series does not match your dimensional envelope, we evaluate the project under our Custom Gearboxes category and propose structural changes rather than forcing a standard unit into place. For a broader supply scope, we also provide related transmission components and intelligent drive elements alongside the gearbox.
Before order confirmation we document the technical specification, BOM, packing list and nameplate data so that drawings and fitted parts match. After delivery we supply drawings, specification manuals and installation guides for assembly and commissioning, and our engineers remain available for remote troubleshooting and working-condition advice.
To prepare a configuration and quotation, we start with the machine's working point rather than a model number alone. The following input gives us enough engineering detail to recommend an RD variant or a modified unit.
How do I know whether the RD series fits my power harrow project?
The quickest path is to send the existing gearbox reference or the mounting envelope, plus the tractor PTO speed and the harrow working width. We then confirm which RD model matches or what needs to be modified in shaft extension, ratio, rotation direction or clutch specification.
Can you match an existing gearbox without a drawing?
Yes. We can work from a sample unit, a datasheet or a damaged gearbox. We measure the housing, input and output shafts, PCD and ratio, then compare those points against our RD-series tooling before quoting. If the envelope differs, we review the project under custom development.
What is the difference between ND RD1952 and ND RD1552?
RD1952 is the primary drive gearbox for the harrow transmission. RD1552 is the heavy-duty drive unit for farm power harrow machines where higher impact loads and tougher working conditions require a stronger housing and drive margin. RD1951 covers applications needing an integrated clutch and variable-speed transmission assembly.
What quality checks are performed before shipment?
We run incoming material control, process monitoring and final inspection. The final checks cover dimensional accuracy, gear performance, sealing, assembly status, surface finish and export packaging. Customized gearboxes can be subject to performance tests and factory acceptance tests with test records.
Do you supply the complete driveline or just the gearbox?
For many harrow programs we supply the gearbox together with related transmission components, shafts and accessories, which simplifies procurement. We can also develop custom units around your rotor configuration when the complete machine package is required.
Our portfolio also includes ND RD1952 Drive Gearbox for Agricultural Power Harrow for applications with different operating ranges, interfaces or integration requirements.