A rotary rake is built around one simple demand: a single tractor PTO shaft has to spin a whole row of tine rotors at matched speed and matched phase. The part that makes this possible is the rake gearbox, and in the HR series it is built as a one-input, mult...
View MoreA power harrow earns its reputation in the field, but the part that decides whether it survives a full season is usually hidden under a cover. The gearbox takes the PTO input from the tractor, redirects or steps it down, and delivers controlled torque to the ...
View MoreCorn headers are unforgiving drivetrains. Snapping rolls must turn slowly while carrying high torque, gathering chains must stay synchronized on both sides, the cross auger has to move a heavy mat of stalks, and any of these functions can seize within a secon...
View MoreAt Hangzhou Hengnie Machinery Co., Ltd., we design and build dedicated drive units for agricultural implements rather than adapting general-purpose reducers. Our Application-specific Gearbox manufacturer line covers six machine-specific series – PL, RD, BL, SP, HV and HR – each developed around the workload, installation envelope and vibration profile of a specific farm machine. As a China-based manufacturer, we combine in-house R&D, gear cutting, assembly and testing under one roof, and more than 85% of our output goes to OEM partners in Europe, America and Australia.
Application-Specific Agricultural Gearbox engineering starts with the implement, not with a catalog. An Application Specific Gearbox for Farm Machinery is not a standard box with a different paint finish. We take the machine's working point – input speed, output torque, duty cycle and mounting constraints – then adjust tooth geometry, housing wall thickness, oil seal specification and output-shaft bearing capacity to the actual load.
This category is organized into six child series, each with its own housing geometry, reduction path and output configuration. The table below summarizes where each series fits.
| Series | Machine Fit | Design Focus |
|---|---|---|
| PL Series Mixer Gearboxes | Feed mixers, TMR vertical mixers, mixing and agricultural machinery | High torque at low output speed; sealed housing prevents slurry and fine-powder ingress; compact flange mounting for coaxial alignment with the mixer main shaft |
| RD Series Power Harrow Gearboxes | Agricultural power harrows | High housing deformation resistance for instantaneous impact loads; low transmission loss for efficient soil pulverization and deep tillage |
| BL Series Round Baler Gearboxes | Round balers and forage bundling equipment | Reinforced gear teeth for alternating torsion; housing dimensions fit baler frame mounting positions |
| SP Series Sprayer Pump Gearboxes | Sprayer pumps, orchard sprayers, pesticide sprayers | Shiftable speed with shift fork; optional flange mount for direct pump or fan connection |
| HV Series Corn Header Gearboxes | Corn header drive points | Compact envelope and output arrangement adapted to the header's confined mounting space |
| HR Series Rotary Rake Gearboxes | Rotary rake and hay tools | Continuous PTO-driven operation with dust exposure and periodic load changes |
Representative models include the ND PL771 high-torque planetary reducer for feed mixers, ND PL772 for vertical twin auger TMR feed mixers, and ND PL413 planetary gear reducer for mixing and agricultural machinery. The PL Series Mixer Gearboxes are built around low output speed, high torque and a sealed housing that keeps organic slurry and fine powder out of the gear cavity. This directly addresses the corrosion and jamming risks common in feed mixing lines.
The ND RD1952 drive gearbox, ND RD1552 heavy-duty drive unit and ND RD1951 clutch variable-speed transmission assembly cover standard and high-load power harrow layouts. The RD Series Power Harrow Gearboxes are designed to survive hard soil clods and stones without housing deformation, while gear geometry keeps efficiency loss low for seedbed preparation in large-field tillage.
ND BL260, ND A609 and ND B121 are cast-iron drive units developed for agricultural balers. The BL Series Round Baler Gearboxes manage the large load fluctuations of forage gathering and compression. Enhanced quenching of the gears provides resistance to alternating torsion, and the housing dimensions are machined to fit the baler frame so the unit remains quiet and free of gear skipping during continuous operation.
The SP series adds shiftable-speed gearboxes with fork for sprayer machines, including optional flange-mount and shift-fork models for orchard pesticide sprayers. HV series units are configured for corn header drive points, while HR series units address rotary rake duty. These series follow the same design discipline: the housing, seals and bearings are specified for the machine's operating environment rather than carried over from a standard product.
Application Gearboxes must fit the complete driveline. We work with tractor PTO, engine or hydraulic motor inputs and can specify speed ratios, shaft orientations and mounting dimensions to match the implement. For sprayer pump drives, shift-fork speed change is integrated in the gearbox. Where a hydraulic source is preferred, the D-series hydraulic drive gearboxes provide standard motor flange positions for direct connection.
Beyond the gearbox itself, we support the whole drive package. This includes selecting accessories, calculating the mounting interface, and, where required, supplying intelligent control systems together with the transmission components. Because we produce in our own factory, design changes are managed in-house from pattern and mold development through gear cutting, heat treatment, assembly and testing.
Installation guidance is part of the delivery. Our technical documentation includes mounting dimensions, shaft extension details, oil specifications and fastening recommendations. For mixer units, flange mounting simplifies coaxial alignment with the mixing shaft. For harrow and baler units, the housing is machined to locate against the implement frame. Final machine guarding remains the implement builder's responsibility, and our drawings define the rotating envelope and mounting interfaces for that purpose.
Production runs under our ISO-based quality management system with three control stages: incoming material control, process monitoring and final product inspection. For every application-specific gearbox, inspection covers dimensional accuracy, gear performance, sealing, assembly status and surface finish. Customized units can be scheduled for performance testing and factory acceptance testing, and we sign off inspection records, test reports and shipping documentation before export.
Serviceability is designed into the product line. We supply original gearbox spare parts and components – including bevel gears, cylindrical gears, transmission shafts and PTO shafts – so maintenance does not depend on a third-party supplier. After delivery, our engineers provide technical documentation, remote consultation and project follow-up to support field commissioning and later product iteration.
To prepare a precise configuration and quotation, we need the project data below. The more complete the operating profile, the closer the first sample will be to the final production unit.
How do you adapt a gearbox to a specific implement?
We start from the implement's working point and installation boundaries. That means we adjust gear ratios, tooth geometry, housing thickness, seals and output shaft capacity for the load profile. If you already have a machine layout, we work from drawings, samples or a worn part to define the interface exactly.
Can you develop a new application-specific gearbox for a machine that is not in the six series?
Customization is our core business. Our ODM/OEM workflow covers design, prototyping and mass production for non-standard agricultural transmission parts. If none of the existing series fits your space or load, we use your working-condition data, drawings or sample to develop a dedicated housing and gear set.
What information do you need to quote an application-specific gearbox?
At a minimum, we need the machine type, input speed, output speed or torque, available installation space, and the working environment. The more detailed the operating profile – duty cycle, impact loads, washdown and expected service life – the more accurate the quotation and first article will be.
How do you verify quality before shipment?
Each unit goes through incoming material control, process monitoring and final inspection. Checks include dimensional accuracy, gear performance, sealing, assembly status and surface finish. For customized gearboxes, we can arrange performance testing and factory acceptance testing, then provide signed inspection records and test reports with the shipment.
Do you support the product after delivery?
Yes. We supply technical drawings, specification manuals and installation guides, and our engineers provide remote consultation for fault analysis or working-condition changes. Original spare parts including gears, shafts and PTO shafts are available to keep the gearbox in service without relying on aftermarket parts.