A rotary rake is built around one simple demand: a single tractor PTO shaft has to spin a whole row of tine rotors at matched speed and matched phase. The part that makes this possible is the rake gearbox, and in the HR series it is built as a one-input, mult...
View MoreA power harrow earns its reputation in the field, but the part that decides whether it survives a full season is usually hidden under a cover. The gearbox takes the PTO input from the tractor, redirects or steps it down, and delivers controlled torque to the ...
View MoreCorn headers are unforgiving drivetrains. Snapping rolls must turn slowly while carrying high torque, gathering chains must stay synchronized on both sides, the cross auger has to move a heavy mat of stalks, and any of these functions can seize within a secon...
View MoreAt Hangzhou Hengnie Machinery, the A Series Agricultural Angle Gearbox Manufacturer programme is our dedicated response to one recurring problem in agricultural machine design: how to change the direction of power where a straight-line driveline is impossible. We build these units as cast iron angle gearboxes and angle speed reducers for grain handling, mowing, grass cutting and transport equipment that must run for long shifts in dust, mud and intermittent shock loads.
The A Series is not a single housing shape. It includes 45° bevel units, 68° helical-angle drives, 1:1 right-angle bevel boxes and three-way transfer cases, all sharing the same engineering logic: high-strength cast iron, sealed joints and gear sets sized for field duty. One machine can therefore cover many installation angles, and our catalogue is structured so that OEMs, distributors and maintenance teams can compare the available units against an exact machine layout.
We position the A Series for agricultural machinery and related power transmission applications where the input shaft and output shaft are not parallel. The most common installations in this category are grain truck pipeline drives, lawn mower multi-cutter heads, grain cart augers, rotary grass cutters and bulk material conveyors.
These applications need power to turn a corner into a vertical or angled auger while maintaining speed. The 1:1 right-angle ND A607 and the 68° helical units ND B682 and ND B684 are built for this duty, and the ND B457 spur gear assembly is adapted to pipeline spiral-blade grain conveyors with pipe connection.
Mower decks require multiple cutter heads driven from one input. The ND A501 is a one-in/three-out bevel gear transfer case with a 45° configuration and 1:1.2 speed ratio for high-frequency rotary cutting. The ND A453 covers 45° power steering on machines where a non-standard layout rules out a conventional 90° box.
Compact cast iron cases let us fit special mechanical layouts and auxiliary drives on seeders, spreaders, harvesters and field implements. Because the shaft ends, ratio and flange details are made to order, the A Series can be integrated as a direct replacement or as part of a new machine programme.
The table below summarises the current A Series line as presented in our catalogue. Where a specification is published, it is listed; where the working point is open, we size it against the machine duty cycle.
| Model | Angle / Configuration | Ratio / Input Speed | Primary Application Fit |
|---|---|---|---|
| ND A453 | 45° bevel gearbox | 1:1, 540 RPM, 54–95 HP | General agricultural equipment needing 45° power conversion without heavy overload |
| ND A501 | One-in/three-out bevel gear transfer case, 45° | 1:1.2 | Rotary grass cutters, field mowers and lawn trimming machines |
| ND A607 | 90° right-angle cast iron gearbox | 1:1, 540 RPM, 15–34 HP | Grain transport trucks and material transport equipment requiring equal-speed direction change |
| ND B682 | Helical 68° angle drive | Configured to application | Grain cart drives requiring oblique power transfer |
| ND B684 | Cast iron 68° drive unit | Configured to application | Grain transport vehicles with angled shaft routes |
| ND B457 | Spur gear transmission assembly | Configured to application | Auger-flight grain conveyor with pipe connection |
For parallel-shaft or aluminum-housing requirements, the adjacent families cover those conditions: BA Series Aluminum Housing Gearboxes for lightweight right-angle and spiral bevel drives, and B Series Cast Iron Gearboxes for 90° steering on chippers, tillers and conveying equipment.
Agricultural angle transmission sees contamination, vibration and impact that an industrial enclosure never encounters. The high-strength cast iron housing gives the A Series the stiffness needed to keep bevel and helical gears in mesh, and it absorbs shock from grass cutters, auger blockages and rough transport. It also provides stable sealing surfaces, which is why these boxes can run in muddy dust and wet field conditions without frequent resealing.
Precision bevel gear matching is used for the 45° and 90° models, giving smooth rotation and low noise under continuous use. The 68° models use helical gearing for oblique torque transmission, while the conveyor assembly uses a spur gear arrangement adapted to the pipe structure. In every case, the ratio and direction of rotation must be agreed before machining, because the gear set, housing bores and shaft shoulders are produced as a matched system.
We configure each A Series unit from the working point, not from a one-size-fits-all table. The stated 540 RPM input speed aligns with standard tractor PTO and common agricultural driveline speeds, but we also machine units for lower-speed/high-torque and higher-speed applications. The A Series therefore covers both pure angle gearboxes and agricultural machinery angle speed reducers, depending on whether the driven equipment also needs a ratio step.
When our proposal is prepared, we calculate the actual service factor for the application and confirm whether the unit will run continuously, intermittently, or with frequent start-stop cycles. That distinction matters more than nominal horsepower, because a mower gearbox and a grain truck gearbox can transmit the same rated power but face completely different shock levels.
Because the A Series is produced in our own factory, we can adapt the base models without treating every change as a new product. Typical configuration changes include:
Where a standard A Series model does not fit the machine layout, we move directly to Custom Gearboxes: design, prototype and mass production based on your drawings, samples or working-condition description. This is the same path we use for OEM and ODM projects, and it includes early technical review so that the final drawing matches the actual field installation.
Hangzhou Hengnie Machinery is a direct manufacturer with independent processing, R&D and mould development capabilities. The A Series is produced on a standardized assembly-line model, and each unit passes through what we describe internally as a triple control loop: incoming material control, process monitoring and final product inspection, under an ISO quality management system.
For customized A Series units, we organize performance tests and factory acceptance tests agreed at order confirmation. Inspection reports, test records and shipping documentation are checked for consistency with the technical drawings, BOM and nameplate data before dispatch.
To prepare a technical proposal and quotation for an A Series angle gearbox, we need the machine context, not just a model number. The following data is the minimum we use to size the unit correctly:
With this information we can confirm housing size, gear rating, shaft diameter, seal specification and whether the standard catalogue model is sufficient or a custom machining drawing is required.
Design for maintainability is part of the A Series approach: simple internal structure, reliable sealing and widely available bearing and seal sizes. When a unit is eventually serviced, the gear set, seals and shafts are accessible as matched components, and we can supply the corresponding spare parts from our gearbox spare parts line.
Every shipment includes the technical documentation needed for assembly and commissioning: dimensional drawings, specification manual and installation instructions. After delivery, our engineers remain available for remote consultation, fault analysis and working-condition recommendations. For OEM projects, we also collect field feedback and feed it back into the next design iteration.
Yes, for the applications it is designed for. The cast iron housing, sealed joints and matched gear sets are intended for the muddy, dusty and impact-loaded conditions of agricultural work. In our proposal we confirm the duty cycle, service factor and sealing specification for your particular machine so that continuous operation is not left to chance.
ND A453 is a 45° bevel gearbox for non-standard power steering in general agricultural equipment. ND A501 is a three-way 45° transfer case with one input and three outputs for rotary grass cutters. ND A607 is a 1:1 90° right-angle cast iron gearbox for grain transport trucks and similar equal-speed applications. The choice depends on the angle, number of outputs and speed ratio required by the driven machine.
Yes. The catalogue explicitly lists shaft and transmission ratio as custom-made as required. We can adjust keyways, splines, shaft lengths, flange interfaces, breather positions and ratio to match existing machine structures. For larger deviations we move to custom gearbox development using your drawings or samples.
The working point is the most important input: application type, input power and speed, required output angle and ratio, mounting orientation, shaft arrangement, duty cycle and environmental conditions. A reference drawing or sample helps us confirm the interface quickly.
Yes. We are a direct manufacturer with in-house R&D and production, and customized manufacturing is a core part of our business. OEM and ODM projects can start from a drawing, a sample or only a working-condition description, and follow our design, prototype and mass-production workflow.