Industry News

Agriculture gearboxes take power from a tractor PTO, engine or hydraulic motor and pass it to an implement while changing its direction, speed and torque. The right one depends on three choices: the housing material (aluminum for light and medium loads, cast iron for heavy and shock loads), the gear layout (right angle bevel, parallel shaft, conjoined or hydraulic drive), and the machine it will drive, such as a baler, rotary tiller, feed mixer, sprayer or manure spreader.
Most farm implements cannot be driven straight from the tractor. The PTO turns at one speed on one axis, while a tiller, baler or mixer needs a different speed, a different angle, or more torque. The gearbox sits in between and solves all three problems in one sealed unit.
Because farm gearboxes work in dust, mud, water splash and heavy alternating loads, they are built differently from general industrial units. Housings are thicker, seals are chosen for dirty conditions, and output bearings are sized for the shock loads that come from stones, roots and uneven crops.
The table lists the main series in a typical agricultural range and what each one is built for. Each name links to its product category.
| Series | Housing | Layout | Typical Machines |
| BA series | Cast aluminum alloy | Right angle spiral bevel | Balers, mini winches, auxiliary drives |
| B series | High-strength cast iron | 90 degree helical or bevel | Rotary tillers, wood chippers, grain augers |
| A series | High-strength cast iron | 45 degree, 68 degree and 1:1 right angle | Grass cutters, grain trucks and carts |
| C series | Aluminum or cast iron | Multi-box conjoined | Fertilizer and manure spreaders |
| Parallel shaft | Aluminum or cast iron | Parallel input and output shafts | PTO generators, feed mixers, crushers |
| Hydraulic drive | One-piece cast iron | Motor-flange bevel | Orchard and organic fertilizer spreaders |
| Application-specific | Matched to machine | Planetary, shift-fork, clutch and others | Mixers, power harrows, balers, sprayers |
A right angle gearbox turns power through 90 degrees, or through another fixed angle such as 45 or 68 degrees. This suits a tractor PTO that points forward while the implement shaft runs across the machine. The BA series aluminum housing gearboxes use spiral bevel gears in a lightweight housing. The B series cast iron gearboxes add a heavier housing for impact and vibration, and the A series right gearboxes cover angle variants for grass cutters and grain handling equipment.
In a parallel shaft unit the input and output shafts sit side by side, which gives a straight, smooth power path. Parallel shaft gearboxes come in aluminum for weight-sensitive equipment and in cast iron for crushing and rolling loads, and several models act as speed increasers for machines that need more output speed than the PTO supplies.
Wide machines sometimes need power at several points along a long frame. The C series conjoined gearbox links several boxes on one coaxial line, so the outputs stay synchronized and torque is shared evenly. The number of boxes can be matched to the machine width.
When an implement is run by a hydraulic motor rather than a PTO, the hydraulic drive gearbox bolts directly to the motor flange. That removes the adapter plate and shortens the piping, and the one-piece housing helps reduce oil leakage at the flange joint.
Housing material is the first practical decision, because it sets weight, heat behavior and shock tolerance. Neither is better in every case. The table shows how they compare.
| Factor | Aluminum Alloy | Cast Iron |
| Weight | Light, helps where machine weight is limited | Heavier, adds stability |
| Heat dissipation | Good, helps in long continuous running | Moderate |
| Impact and vibration | Suited to low and medium loads | Better against shock and heavy alternating loads |
| Wall thickness and rigidity | Lighter structure | Thicker walls, higher rigidity |
| Typical use | Light spreaders, balers, auxiliary drives | Tillers, chippers, heavy spreaders, crushers |
If you already know the machine, you can usually narrow the choice straight away. These are the most common matches.
For other machines, match by function. Rotary tillers and wood chippers lean towards the B series, grass cutters and grain carts towards the A series, and manure spreaders towards the C series or hydraulic drive units. Generators, crushers and some mixers fit parallel shaft models.
Work through these questions in order. Having the answers ready also makes a quote request much faster.
Confirm whether power arrives from a PTO, an engine or a hydraulic motor, and the input speed and direction of rotation. A hydraulic motor points to a flange-mount drive gearbox.
Decide whether the output needs a turn of 90, 45 or 68 degrees, or stays on a parallel axis. This sets whether you need a bevel, helical or parallel shaft unit.
Check whether the machine needs a speed reducer, a 1:1 transfer or a speed increaser. Some models are designed as increasers for high-speed implements.
Steady loads tolerate lighter housings. Shock, stone strike and heavy alternating loads call for cast iron and a larger bearing margin.
Match shaft type (solid or splined), shaft diameter and the mounting style, such as foot, vertical or flange, to the machine frame.
Dust, mud and water splash need good sealing. Long continuous running needs a housing that sheds heat well.
Tip: bring a drawing, the old gearbox model number or a photo of the existing unit when you ask for a quote. That is usually enough to identify the right series quickly.
These models show how the series above appear in real machines. Open any one to see its full detail.
Some machines have unusual shaft positions, tight installation space or loads that standard models do not cover. In that case a custom gearbox is designed around the machine, not the other way round. The design starts from five inputs:
Giving the engineering team these five points early, together with a drawing of the machine, shortens development time. OEM and ODM projects follow the same path from drawing to sample to production.
Worn parts do not always mean replacing the whole unit. Gears, shafts and PTO shafts can be supplied separately, including cylindrical gears, bevel gears, power transmission shafts and PTO shafts. The full range is listed under gearbox spare parts and components.
A right angle gearbox turns the power direction, usually by 90 degrees, using bevel gears. A parallel shaft gearbox keeps input and output on parallel axes and changes speed and torque without changing direction. Pick by how the PTO line meets the implement shaft.
Yes, for light and medium loads where weight matters, such as balers, light spreaders and auxiliary drives. For rotary tillers, chippers, crushers and any machine with frequent shock loads, cast iron is the safer housing.
A speed increaser raises output speed above input speed. It suits machines that need to run faster than the PTO, such as feed mixers and some implements with high-speed rotors, and several models in the B series and parallel shaft range are made as increasers.
Start with the machine type, power source, direction change, ratio and shaft style. If you have the old gearbox, send its model number and a photo. If no standard model matches, a custom gearbox can be designed from your drawing.
Yes. OEM and ODM development is available, from changes to shafts and mounting to a fully custom design based on torque, speed, installation space and working environment.
Follow the maker's oil schedule. As a general rule, check the level and look for leaks regularly during the season, and change the oil at the end of the season or sooner after heavy, dusty or wet work.
Hengnie Machinery was recognized as a provincial-level specialized and innovative enterprise, and continues to deeply cultivate the agricultural machinery transmission supporting industry.
Mar 10,2026Helical Gearbox for Agricultural Machinery: How It Works, Types and Selection
Oct 23,2026How Does a Parallel Shaft Gearbox Work: Gears, Shafts and Mounting in Farm Machines
Oct 23,2026
+86 18058161630
+86 571 81607235
sales@ag-mech.cominfo@ag-mech.comiris@ag-mech.com
No.21 Feixiang Rd, Suoqian Town,Xiaoshan Dist. Hangzhou, Zhejiang Province, China
Copyright ©
Hangzhou Hengnie Machinery Co., Ltd.
All Rights Reserved. Wholesale Agriculture Speed Reducers Supplier Custom Agricultural Gearboxes Manufacturer
